Product Introduction
Application
Product Parameter
YNC-J1
INDUSTRIAL EQUIPMENT
High precision
Good linearity
Low temperature bleaching
Fast response time
Strong anti-interference ability
Product Introduction
The sensor series open-loop Hall current sensor is insulated between primary and secondary and is used to control and measure DC, AC and pulse currents.
The magnetic flux generated by the primary current is gathered in the magnetic circuit and detected by the Hall element in the air gap. The output voltage of the Hall element is processed and the standard voltage signal is output at the output end of the sensor. The voltage signal accurately reflects the change of the primary current.
Product Parameter
Main electrical parameters
| 額定測量電流 IPN(A) |
測量范圍 IPM(A) Vc:±15V |
測量范圍IPM(A) Vc:±12V | 一次側回路對二次側回路之間耐壓KV/50Hz/1min | 型 號 |
| 200 | 0 - ± 600 | 0-±500 | 5 | YNC-200J1 |
| 400 | 0 - ± 1200 | 0-±1000 | 5 | YNC-400J1 |
| 500 | 0 - ± 1500 | 0-±1250 | 5 | YNC-500J1 |
| 600 | 0 - ± 1800 | 0-±1500 | 5 | YNC-600J1 |
| 800 | 0 - ± 2400 | 0-±2000 | 5 | YNC-800J1 |
| 1000 | 0 - ± 2500 | 0-±2500 | 5 | YNC-1000J1 |
| 1200 | 0 - ± 2500 | 0-±2500 | YNC-1200J1 | |
| 1500 | 0 - ± 2500 | 0-±2500 | YNC-1500J1 |
| 額定測量輸出 VOUT | ± 4V | ||
| 負載電阻 RM | ≥10kΩ | ||
| 電源電壓 VC | ± 12V or ± 15V(± 5%) | ||
| 電流消耗IC | ≤ 15mA | ||
Dynamic performance parameter
| 準確度 X | ≤1%（+25℃） |
| 線性度 εL | ≤1% |
| 零點偏移電壓 VOE | ≤±20mV（+25℃） |
| 剩磁 VOH | ≤±10mV |
| 零點溫度漂移 TCVOE | ≤1mV/℃ |
| 輸出溫度漂移 TCVOUT | ≤0.1%/℃ |
| 帶寬(-3db) BW | DC...25KHZ |
| 響應時間 Tr | ≤5us |
| 跟隨精度 di/dt | ＞50A/us |
General parameter
| 工作溫度 TA | 儲存溫度 TS | 重量 M |
| -40℃～+85℃ | -40℃～+105℃ | 275g |
Do you have any questions
You can contact us anytime, anywhere!
You can contact us anytime, anywhere!
Follow us:
