Product Introduction
Application
Product Parameter
YNL-M4
INDUSTRIAL EQUIPMENT
High precision
Easy to install
Small size saves space
No insertion loss
Strong anti-interference ability
Product Introduction
The sensor series of open loop type Hall current sensor is insulated between the primary and secondary, which is used to control and measure small DC current.
A measuring module that uses the Flux gate principle to convert the measured DC current into a DC current or voltage signal proportional to the current output.
Product Parameter
Main electrical parameters
|
額定測量電流
IPN(mA)
|
測量范圍IPM(mA) |
型號
|
| 5 | 0 - ±20 | YNL-0005M4 |
| 10 | 0 - ±40 | YNL-001M4 |
| 50 | 0 - ±100 | YNL-005M4 |
| 100 | 0 - ±200 | YNL-010M4 |
| 200 | 0 - ±400 | YNL-020M4 |
| 500 | 0 - ±800 | YNL-050M4 |
| 額定測量輸出 VM | ±5V (4V) |
| 負載電阻 RM | ≥10kΩ |
| 電源電壓 VC | ±12V 或±15V （±5%） |
| 電流消耗 IC | ≤20mA+輸出電流 |
| 一次側回路對二次側回路之間耐壓 | 3kV/50Hz/1min |
Dynamic performance parameter
| 準確度 X | ≤2.0%（+25℃） |
| 線性度 εL | ≤1.0%（+25℃） |
| 零點偏移電壓 VO | ≤±50mV（+25℃） |
| 零點溫度漂移 VOT | ≤±100ppm /℃（-25℃～+85℃） |
| 響應時間 Tr | ≤300ms |
General parameter
| 工作溫度 TA | 儲存溫度 TS | 重量 M |
| -15℃～+80℃ | -25℃～+85℃ | 102g |
Do you have any questions
You can contact us anytime, anywhere!
You can contact us anytime, anywhere!
Follow us:
